obd2tools
Archives2019
January 2019
February 2019
March 2019
April 2019
May 2019
June 2019
July 2019
August 2019
September 2019
October 2019
November 2019
December 2019
2020
January 2020
February 2020
March 2020
April 2020
May 2020
June 2020
July 2020
August 2020
September 2020
October 2020
November 2020
December 2020
2021
January 2021
February 2021
March 2021
April 2021
May 2021
June 2021
July 2021
September 2021
October 2021
December 2021
2022
January 2022
February 2022
May 2022
December 2022
2023
January 2023
February 2023
March 2023
July 2023
August 2023
How to Fix OBDSTAR “Unfortunately, DiagProgam has stopped.”
To obdstar users: regarding the problem “Unfortunately, DiagProgam has stopped.” that frequently appears recently, it is caused by compatibility issues.
A new apk version v3.8.1 has been released this week to solve this problem. (Note: The solution is applied to any of x300dp, x300 dp plus, odomaster, x300pro4.)
For the obdstar machine which update service is valid, you can directly upgrade the apk to solve this problem.
For the obdstar machine which update service expired, please clear the cache to solve the problem, the drawback is that this problem may occur repeatedly, because there is no way to upgrade the new apk v3.8.1 after the expiration, you have to clear the cache repeatedly.
Please look at the last paragraph on how to clear the cache.
Attention Please:
Never restore factory settings, otherwise the software will be lost and there is no way to restore it.
Guide on how to clear the cache:
Enter ” DiagProgam”, long press it and drag it into “App Info”
In the APP info, tap “Clear data” and “Yes” to confirm.
Okay, the catche is cleared, and the problem is solved. However, please keep in mind, better continue subscribing the update service and update the newest APK.
by obd2tools on 2021-02-19 04:42:50
No comments yet.