obd2tools
Archives2019
January 2019
February 2019
March 2019
April 2019
May 2019
June 2019
July 2019
August 2019
September 2019
October 2019
November 2019
December 2019
2020
January 2020
February 2020
March 2020
April 2020
May 2020
June 2020
July 2020
August 2020
September 2020
October 2020
November 2020
December 2020
2021
January 2021
February 2021
March 2021
April 2021
May 2021
June 2021
July 2021
September 2021
October 2021
December 2021
2022
January 2022
February 2022
May 2022
December 2022
2023
January 2023
February 2023
March 2023
July 2023
August 2023
How to update MB SD Connect C4 C5 Firmware
Mb sd c4 plus/mb sd c5 met such error and can not communicate with car, how to solve? it seems the main unit lack the program file, and you need to update the hardware.
Here we share the procedure to update and re-flash MB SD C5/C4Plus, in case if something about firmware goes wrong you may need it.
SD Connect C4 / SD Connect C5 Hardware Upgrade Instructions:
* Path one: C:Program FilesMercedes-BenzSDConnect Toolkit
* Path two: C:Program FilesSoftingDiagnostic Tool Set 88.03InterfacesDCDI_DPduApieCOM_Toolkit
* Change the three file names of update_automaticx, update_manualx, and update_specicalx under path one and path two to update_automatic, update_manual, and update_specical (remove the letter x at the end of the file name). After the modification, see Figures 3 and 4 below.
* After changing the file name, the computer restarts
* C4 and C5 need to install 6 AA batteries (see steps 1 pdf for details) [sp100-e doip hardware upgrades do not need to install batteries]
* Obd main line should be connected to car or 12v power supply
Reboot your computer as required.
Right-click “SDconnect Toolkit” and select “Administration”.
Select the device when it’s identified.
Go to “Software update”.
Download “00_ClearCeFlashDisk_zip”“02_CSD_2_11.zip”“01_Bootimage_2_3.zip”“03_PmPic29_Cpld13.zip” successively.
by obd2tools on 2023-03-26 10:24:57
No comments yet.