Is it worth the money to have a OEM Tango key programmer? How about the quality of the Cloned? Here you go.
Part 1: what is Tango, original vs clone?
TANGO = Key maker by dump file and have some function for OBD2 in Toyota cars.
Genuine Tango has basic software, made by Scorpio
http://www.obd2tool.com/goods-1726-Tango+Key+Programmer+with+Basic+Software.html
Clone OEM Tango has full software,made by Fly
http://www.obd2tool.com/goods-5108-Newest+OEM+Tango+Key+Programmer+with+All+Software+Firmware+version.html
Part 2: Tango key programmer good or not?
clone Tango: poor quality
The Chinese sell genuine (OEM) and original Tango. The OEM one is from FLY and it is cheaper with poorer quality.
The original Tango is from scorpio. At that price it won’t be a clone.
Tango from fly: waste time and money
don’t waste time and money for Tango from fly… Last week I bought original Tango from scorpio so I can compare and every keys and dump which China Tango can NOT program the original Tango did it straight away without any problem!!!
Buy clone Tango from FLY = Buy Disappointment
Buy original Scorpio Tango = Buy Happiness
clone Tango: bad PCB
This is what i have. China... More
by obd2tools on 2017-12-31 08:52:46
Problem:
GM Tech2 scanner error: Tech 2 Scan Tool CANdi module interface not detected.
Solution:
1.Together with the car ignition off, connect the gm tech two and gm tech 2 CANdi module(which now is a single extended cable).
2.Power up the Tech2 You may get 12V in the DLC (now it took me a half hour to find out the “DLC signifies “Data Hyperlink Connector” and is what we also call the Obd2 scan tool, so be ready to be stumped by TLA’s (Three Letter Acronyms).
3.At the principal menu press F3-tool solutions.
4.In the tool alternatives screen pick F9, CANdi Diagnostics.
5.You will find two tests on the subsequent screen, run them each. When you get pass on each, that you are excellent to go. The CANdi should really talk to your 2004 vehicle.
six.
6.Either turn the ignition key of your car to on, or start out it (for a C6 there is not an “on”).
7.Press the EXIT button till the Tech2 Scanner goes back to the primary menu.
8.Choose F0, Diagnostics.
9.Make all of the requested selections to get you for the module inside the automobile you would like to appear at. You could be choosing physique style; you might want the body code (from time to time the... More
by obd2tools on 2017-12-23 05:04:36
Hardware Requirement:
1. A computer that can access the Internet.
2. A TF card reader/writer and a TF card that need to be updated.
Follow the steps described as below to proceed registration and update:
1. Go to http://mycar.x431.com and click the CReader CRP129 Premium (crp123 premium) once, then click updating icon.
2. Download and install the update tool and launch the program when installed.
3. You will be prompted to type in the Serial Number (located at the back of the tool).
4. After the Serial Number is entered, click [Update] and enter the following information. Click [Submit].
5. The Register Code can be found by connecting the supplied USB cable to the tool and inserted into the computer.
6. When the tool has powered up, place the cursor on the Help icon and press the [OK] button.
7. Select [Tool Information], press [OK].
8. This is the Register Code number for inputting into step 4
9. Install the TF card from the Launch CReader Professional CRP129 Pro into the supplied USB TF card adapter and insert into USB port of CPU.
10.Reopen the CRP update Suite and select the updates you would like to perform or click [Select All] and click [Download].
More
by obd2tools on 2017-12-12 08:13:54
Xhorse VVDI2 or Flyobd FVDI2 (not FVDI 1st generation but 2nd)? I am gonna buy one of these, just don’t know which one would suite me best. I’ll use it for VAG group clusters changing g6/touran/tiguan etc., immo adaptation, making keys, millage correction. Any advice?
VVDI2 VAG vs FVDI2 VAG:
VVDI2 VAG supports VAG cars: VW, Audi, Seat, Skoda, 4th immobilizer Porsche, 4th immobilizer Bentley.
It works perfect in diagnostic, 4th immobilizer, 5th immobilizer, key learn, BCM remote control, Engine control unit, Kline instrument and immobox, adapt unit, component protection, dump tool etc
FVDI2 VAG supports VAG cars: VW, Audi, Seat, Skoda VAG-VW, Audi, Seat, Skoda 4th & 5th immobilizer,incl. 4th & 5th immobilizer AUDI A6/Q7, 4th immobilizer Porsche, 4th immobilizer Bentley.
Also, it works good in basic diagnostic, key programming/PIN codes reading, mileage correction, fault codes reading
VAG diagnostic:
VAG key programming:
Special functions for VAG:
From the charts above, FVDI2 FLY and VVDI2 Xhorse almost share the same functions.
They mainly differ in these aspects:
1 OBD read CS/PIN of MED17
2 generate OEM remote control
3 software authorization
FVDI 2... More
by obd2tools on 2017-12-11 05:44:57
The new software for ATEQ devices has been released today, including updates for: VT56, ATEQ VT55, VT46, H46, VT36 and H36. A new update for WebVT V8 is now also online, enabling additional functionality for the VT56. WebVT V8 will automatically check for updates if this option has not been disabled, but customers that still use WebVT 7 will need to install the new version.
Download WebVT V8
Download Release Notes
Improvements and fixes:
VT36 and VT46: New RKE test available
VT56: WIFI function now active for all users but kept as “beta” version until September so users know that they may encounter issues. ATEQ has spent a long time to make this as easy as a smartphone to set up, but not all European configurations could be tested and so some users may still have issues. Wifi only works for Jobs exchange with the new Web VT 8.10.0.0
Minor text adjustments.
New content for Europe:
New OE sensor coverage for: Audi SQ5 2; BMW 5 Series Touring; Fiat Tipo SW; Ford Fiesta 7; Genesis G90; Honda Civic 10; Land Rover Ranger Rover Velar; Lexus LC; Mazda MX-5 RF; Opel/Vauxhall Ampera-e, Grandland X and Insignia Grand Sports; Skoda Kodiaq Scout and Octavia RS; Suzuki Swift... More
by obd2tools on 2017-12-04 05:16:45