Here is how you can Enable IMMO and Programming in Seek advice from nissan consult III plus with no spending out on the intelligent card.
Find the seek the advice of diagnostictool.ini file
open with notepad
copy and paste this at the bottom
Here for Seek the advice of Nissan Consult 3 Plus:
C:CONSULT-III_plusSystemApplicationApplicationDataCommonSettingDiagnosticTool.ini
Instruction:
[current_geographical_zones]
market=2
area=3
country=USA
[current_language]
language=GB
[unit_conversion]
unit_conv_1=G001.S002
unit_conv_2=G002.S004
unit_conv_3=G003.S006
unit_conv_4=G004.S009
[current_channel]
channel=0
[system_management]
access_mode=1
[device]
vi_device_name=J-Box
[vehicles]
tab_index=2
[mode]
debug_mode=TRUE
debug_mode_vehicle_battery=TRUE
[vehicles]
tab_index=0
That is operating on my setup
Copy this into your diag.inx folder transform the area location and J2534 name and also you needs to be good to go .
Question and answer:
Could be the Seek the advice of 3+ working a 100% with J2534?
Do I will need any further files or media to download to become in a position to program?
Answer: You happen to be pretty limited working with a Pass-Thru with Seek advice... More
by obd2tools on 2018-11-26 08:19:51
Here OBD2TOOL service collect many customers feedback for BMW CGDI on what can work and frequently asked questions and answers. Hope it helps!
CGDI BMW Feedback 1:
1.11-02-2018 update
CGDI works good CAS2 takes 2min CAS3 most of the time Downgrade 10-15min, no solderind all via OBD, as for INS i think it can only do 8HP i have not tried it, but i tried to read the INS from CAS3 and it did no problem.
2.10-10-2018 update
I just got the CGDI for BMW based on reading good reviews for their Mercedes tool. Have not seen much info for the BMW tool so I thought Id give a quick run down from my experience so far with the tool.
For making keys it has worked great. I have made about 7 keys so far all CAS types except CAS4.
I tried to read ISN on 3 cars and failed. I think it may only read ISN from MSV80/85 ecu’s. Will try on the MSV80 soon and will update. All done by OBD.
I have BMWExplorer and have used Autohex as well, but if you only need to program keys and your not concerned with ISN for DME swaps, I would buy the CGDI before those tools.
Its supposed to do ISN but the advertising wording can be misleading. It may only be able to read ISN of 2 types of DME. So far thats how... More
by obd2tools on 2018-11-18 04:16:43
Download Update Tool and Update File
1.Register a member in www.superobd.com
2.Register your SKP-900 in your member centre in your member centre
3.Download the update file in your member centre, and unzip it to get the update bin file.
4.Download the update tool
Perform the Update Steps
5.Connect OBD2 key Programmer SKP-900 to the computer using the USB cable
6.Run the update tool, click OPEN to open the update bin file
7.Click Auto Scan Port button to setup the COM port
8.Click UPDATE button to start update.
CAUTION: It takes about 37 minutes for a update. DO NOT DISCONNECT THE SKP-900 WHILE UPDATING!
Tags: SKP-900 SKP-900 Key Programmer SKP900
by obd2tools on 2018-11-06 07:11:42