obd2tools
ArchivesHow to Read Volvo CEM and KVM Data with Yanhua Mini ACDP No SolderingTo Program Volvo 5-button and 6-button smart key with Yanhua Mini ACDP, you have to read data from CEM and KVM module first. Then write key by uploading password data. Volvo license is required. ACDP Mini supports following Volvo key programming models: Supports 5-button remote key add key and all keys lost Volvo S60 (2010-2018) Read Volvo KVM Data with Key Programmer ACDP Without Soldering Remove the Volvo KVM module located on the tight side of the trunk Disassemble the KVM module Prepare ACDP host, OBP+ ICP adapter, KVM interface board and 20 pin cable
Open Mini ACDP app
Detect PIN Passed Pin detection. If not, clean the corresponding test point Decrypting the chip Confirm VIN information Press... More by obd2tools on 2019-10-24 06:57:55 SKP900 key programmer program Dodge key step by stepHere is a guide on programming a new Dodge key with SKP-900 Key Programmer made by Obd2tool.com technicians. Connect the SKP-900 car OBD2 key programmer to the car and insert the blank key. Select the immobilizer type. Select car model.
The key works perfect. by obd2tools on 2019-10-18 05:43:07 How to Program 2007 Cadillac Key Fob via GM Tech IIThis is an instruction on how to program key fob to 2007 Cadillac CTS-V using a GM Tech2 Tech II scanner. Model: 2007 Cadillac CTS-V The process…here you go… The key to be programmed Insert the key and ignition on The gm tech 2 scan tool power on In the main menu, go to Diagnostics Select model: 2007 Cadillac D (DN) CTS-V passenger car Then go to Vehicle Control Systems Read vehicle info Engine type: (U) 6.0L V8 LS2 Go to Module Setup Then Remote control door lock receiver Program key fobs… Two key fobs to be programmed Tips of programming key fobs: All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the TECH 2. Programming takes 15-30 minutes…. Programmed complete and test it’s working. Done! by obd2tools on 2019-10-17 06:55:00 |
Blog Home Archives |