obd2tools
ArchivesProgram 2011 BMW CAS3+ Key by OBDSTAR X300 DP PLUSIt’s tested ok to add new key to 2011 BMW CAS3+ using OBDSTAR X300 DP Plus key programmer. Car: BMW CAS3+ 2011 Step-by-step guide to add new keys: Select Diag Program-> IMMOBILISER-> BMW-> BMW/Mini V30.36 Initializing diagnostic data… Select Program Key-> Add Keys Turn on the ignition It will take about 2 minutes to read RAM… Connect P001 with X300 DP PAD2 Place an original key into the P001 adapter Then take out the original key and insert the new key into P001 adapter Make the dealer key successfully Finally, test the new key Attach the full BMW IMMO function list supported by X300... More by obd2tools on 2020-07-02 05:35:59 Launch X431 V Program Key Fobs for 2017 Chevy Silverado 5.3LLaunch X431 V 8 inch tablet diagnostic tool supports full system diagnosis and 20 special functions. This article mainly introduces the guide to program key fob on a 2017 Chevy Silverado 5.3L by X431 Pro. Car info: Device: Launch X431 V 8 inch tablet global version Procedures: Reading data… Tap Automatically Search Confirm the VIN and vehicle info Go to System Selection It will show a list of all the modules in the vehicle. Pay attention to the instruction of Erase/Program All Key Fobs: -This procedure is only for vehicles without PRO ATH. Vehicles with ATH need to use SPS for programming. by obd2tools on 2020-07-02 05:24:38 |
Blog Home Archives |