ArchivesI got a MB Vito 2005 with start error. I manage to read ECU 24c04 eeprom but i can not read motorola from immo box. I use clone carprog for this operation , everything as diagram shows but still can not read it. Do you know if Carprog Clone read this Motorola HC08 0J66D? Is there any way to start car without reading this?
Reply by rexercio: ok i managed to fix your dump. Put my fixed dump into ecu. open DAS and make ecu identification (hhtwin) Enjoy!
You need Star Diagnosis. Put my 24c04 into ecu and make idintifaction via HHTwin (using star diagnosis).
Reply by Badea Cristian Clear now but I don’t have Star as well. I’m helping a friend with this car and I don’t have tools for MB. I will try to read that HC08 and make via eeprom programming .
solved …i read it with XPROG and sync them with ImmoKiller. by obd2tools on 2021-02-25 02:27:22 To obdstar users: regarding the problem “Unfortunately, DiagProgam has stopped.” that frequently appears recently, it is caused by compatibility issues.
A new apk version v3.8.1 has been released this week to solve this problem. (Note: The solution is applied to any of x300dp, x300 dp plus, odomaster, x300pro4.)
For the obdstar machine which update service is valid, you can directly upgrade the apk to solve this problem.
For the obdstar machine which update service expired, please clear the cache to solve the problem, the drawback is that this problem may occur repeatedly, because there is no way to upgrade the new apk v3.8.1 after the expiration, you have to clear the cache repeatedly.
Please look at the last paragraph on how to clear the cache.
Attention Please:
Never restore factory settings, otherwise the software will be lost and there is no way to restore it.
Guide on how to clear the cache:
Enter ” DiagProgam”, long press it and drag it into “App Info”
In the APP info, tap “Clear data” and “Yes” to confirm.
Okay, the catche is cleared, and the problem is solved. However, please keep in mind, better continue subscribing the update service and update the newest APK.
by obd2tools on 2021-02-19 04:42:50 To obdstar users: regarding the problem “Unfortunately, DiagProgam has stopped.” that frequently appears recently, it is caused by compatibility issues.
A new apk version v3.8.1 has been released this week to solve this problem. (Note: The solution is applied to any of x300dp, x300 dp plus, odomaster, x300pro4.)
For the obdstar machine which update service is valid, you can directly upgrade the apk to solve this problem.
For the obdstar machine which update service expired, please clear the cache to solve the problem, the drawback is that this problem may occur repeatedly, because there is no way to upgrade the new apk v3.8.1 after the expiration, you have to clear the cache repeatedly.
Please look at the last paragraph on how to clear the cache.
Attention Please:
Never restore factory settings, otherwise the software will be lost and there is no way to restore it.
Guide on how to clear the cache:
Enter ” DiagProgam”, long press it and drag it into “App Info”
In the APP info, tap “Clear data” and “Yes” to confirm.
Okay, the catche is cleared, and the problem is solved. However, please keep in mind, better continue subscribing the update service and update the newest APK.
by obd2tools on 2021-02-19 03:11:15 This is a instruction show you guide on how to use Volvo Tech Tool diagnostic software do to fuel pressure monitor for Volvo FM4 truck.
Procedures:
Run Volvo Tech Tool software on your PC,then input user ID to login (offline)
Select “Test”–>”23-Fuel system”–>”Fuel pressure”
Then click “Start” button
It show you warning message,select “I have read and understand the above advisory”
And click “Continue”
There are two options:
A:Present the sensors values in a graph
Perform the test in the workshop(stationary) or during a test drive(two persons required)
B:Read and present the pressure with the oscilloscope
Perform the Heavy Duty Scanner in the workshop (stationary) or during a test drive(two persons required)
Select “A” and click ”Continue”
To monitor the fuel pressure in various conditions for example during a test drive;either the oscilloscope test in this operation or a manual pressure gauge must be used.Manual fuel pressure test instructions can be found by selecting the symptom Low power in the diagnose tab.
Action:
Read out the status of the operating conditions:
1.Engine not running
2.Run the engine at 600rpm
3.Check... More by obd2tools on 2021-02-10 05:01:14
X-431 PRO Test: 2012 Ford Mondeo Steering Angle Sensor Calibration Instructions
Tested Model: Ford Mondeo, 2012, VIN=WFOGXXGBBGCB*****
NOTES:
1. This function is used to configure the steering angle sensor and calibrate the steering wheel position. Perform this function when corresponding sensors are replaced or the steering wheel position is not accurate.
2. Keep the vehicle on a flat surface, and the steering wheel is set at straight ahead position.
Operation Procedure:
1. Select Ford version above V45.20.
2. Select automatic search.
3. Select Fuel Type=Gasoline.
4. Select “System Selection”
5. Select ABS (Anti-lock Brake System)/ESP (Electronic Stability Program) exhaust.
6. Check vehicle status and ensure that the vehicle is in required status: Vehicle on a flat surface, and the steering wheel is set at straight ahead position.
7. Select Special Function
8. Place the key to ON position in order to turn the steering wheel. Because of the great force of friction between tires and the ground, in order to turn the steering wheel more easily, it is advised to start the engine at this... More by obd2tools on 2021-02-10 01:10:47 |