obd2tools
Archives(Solved) GM Tech2 stopped in “Tech 2 post Ver 6.2”My husband bought one of your tech 2 scanners. When we plug it in and turn it on it says system initializing. Then goes to a screen that says tech 2 post ver 6.2 if 10 items that say passed. It will not go out of this screen. I believe its not making connection with the card for the software. I do have pictures of what its doing, these are the only image the tool gives me. It does this with and without the card in it. I have also attached pictures of the inside of the device where the card goes and the card. I believe they are not making a connection with each other . I found that the memory card had a couple of plugged holes. I tried opening they holes up and was also able to straighten the pins in the tech 2 device. I finally got the card to connect with the tech 2 correctly and now everything seems to be working. Thanks for your help. Thanks to this user, hope it helps. by obd2tools on 2021-05-26 04:51:18 How to get EVAP not ready IM to pass with Tech2I’ve been struggling with this for months now and I came across a post of the Cadillac forum where someone mentioned using the GM Tech2 handheld scanner and running the “Evap service bay” test. First you will need the VCX Nano from obd2tool, it comes with the software for Tech2 and GDS2 emulators and install it on a laptop. The Evap test should be done from a cold start so have everything ready. The reason I failed the Tech2 EVAP test first time was you must keep RPM between 1800-2200 for 8 minutes it was impossible to do that with foot so it failed and i had to wait overnight for a cold start. What i did to fix was I found a piece of wood and placed it between the seat and gas pedal and move the electric seat until RPM is 2000. This worked perfectly I used this when doing brake light testing for inspection as well. * Have everything set up, I opened hood so it wouldn’t get too hot, connect the VCX Nano to the OBD2 port and your laptop and go to the F2: Special Functions->F4: Service Bay Tests->EVAP System Bay Test by obd2tools on 2021-05-26 04:41:38 Autel Scan Tool Backup and Subscription RenewalDoes your Autel subscription expire soon? Has it already expired and you don’t have a backup? Do you have the funds set aside to buy a subscription renewal today? If your subscription has already expired you are playing with fire. The only way to recover the software without a backup is the price of an update, or a Autel Scan Tool. With <$10 it is an easy recovery via backup. To create a backup, simply insert the Micro SD card into your tool and open the base screen (not the diagnostic application). Then open ES File Explorer. There you will find two instances of SD Cards. Open the internal drive, usually label “SD_CARD” or similar. Hold your finger on “SCAN” to bring up lower menu. Select copy. Now open the external SD card, label “EXT_SD” or similar. Paste the copy of “SCAN” here. Depending on model of scan tool this can take up to 3 hrs. Once this is done, remove the SD card and store it somewhere safe where it will not be damaged. It is very small so store it somewhere you’re not going to forget it. Now take the second 32 GB card, insert it into your Autel/Auro tool and repeat the above process. Leave this one in your tool after backup. Update... More by obd2tools on 2021-05-12 11:17:06 |
Blog Home Archives |